ServicesWell Water Treatment
Well Water Treatment in Cedarburg
Orange stains, a sulfur smell or scale on every fixture usually trace back to what your well is carrying. We size treatment to your water and your plumbing, and if the equipment you already own can be brought back, we will tell you that first.
Treatment matched to your well
Private wells draw untreated groundwater, so the minerals and gases in it come straight to your taps. Hard water and dissolved iron are common in wells across the area, and some also carry hydrogen sulfide, the gas behind the rotten egg smell. Each one calls for a different kind of equipment, and many homes need two working together.
Our work starts with what is already in your basement. A ten-year-old iron filter with a worn valve or exhausted media can often be rebuilt for far less than a new system. When the tank is failing, the unit is undersized for your household, or the water has changed, we explain why replacement makes more sense and show you the parts that led us there.
The installation itself is handled by a licensed Wisconsin plumber. We also fit a bypass valve, so if the equipment ever needs service, your home keeps running water in the meantime.
What well water treatment includes
Iron and manganese filtration
Backwashing filters that oxidize dissolved iron and trap it in the media bed, then flush it to the drain on a schedule set for your water. This is what ends the orange rings in toilets and the rust tint on laundry.
Sulfur odor reduction
Air-injection or similar oxidizing filters that pull the rotten egg smell out before water reaches your fixtures. We pay close attention to the water heater too, since odor often concentrates there.
Softening after filtration
Once iron is handled upstream, a water softener can deal with hardness without its resin fouling. Pairing the two in the right order is what keeps both working for years.
Drinking water polish
An under-sink reverse osmosis unit at the kitchen tap gives you a separate supply for drinking and cooking. Our reverse osmosis page covers it in more detail.
Repair of existing equipment
Valve rebuilds, fresh filter media, new injectors and seals, and reprogramming. If that work will give you dependable years from the unit you own, we quote it.
Signs your well water needs attention
Orange or brown staining
Rust-colored marks in sinks, tubs and toilet bowls point to dissolved iron. Bleach tends to set the stain rather than remove it.
A rotten egg smell
Usually hydrogen sulfide. When only the hot taps smell, the water heater is often involved and worth a look.
Slime in the toilet tank
A reddish or dark gel on the tank walls often means iron bacteria, which feed on the iron in your water and can clog lines over time.
White crust and spotting
Scale on faucets, shower glass and dishes is hardness. It also shortens the life of water heaters and dishwashers.
Old equipment falling behind
Stains coming back, a salty taste, or a filter that no longer backwashes are signs a valve or the media has worn out. That usually calls for new parts, not a new system.
Pressure dropping at the taps
A plugged media bed or a stuck valve can choke flow through the whole house. It is worth checking before you blame the pump.
How the work goes
- 1
A phone conversation
You tell us what you are seeing, smelling and cleaning. We ask about your household, your current equipment, and any recent well report you may already have.
- 2
A visit to your home
We look at the pressure tank, existing filters and softener, the plumbing layout, and where a drain line can run. You get a clear answer on what can be repaired and what should be replaced.
- 3
A written quote
Each part and the labor are listed so nothing appears later. Your price stays good for 30 days after we write it, and once you sign, three business days remain yours to change your mind.
- 4
Install day
Water is off for part of the visit. Our plumber sets the equipment, adds the bypass, ties in the drain, programs the backwash and starts the system, then cleans up the work area and walks you through how it runs.
What shapes the cost
Well systems vary more than city water systems because no two wells carry quite the same water. The quote you get by phone costs you nothing, and a visit to your home lets us price the work accurately. If spreading out the cost helps, ask about financing through U.S. Bank Avvance, available on approved credit. Nothing is due up front; payment in full comes when the installation is complete.
- The mix of minerals and gases
- Iron by itself needs one filter. Iron with sulfur, hardness and bacteria may need two or three stages working in sequence.
- Repair or replace
- Rebuilding a sound unit with a new valve or media costs well under a full replacement. A cracked tank or an undersized system changes that math.
- Household size and flow
- More bathrooms and people mean higher flow, which calls for larger tanks so water is treated fully at peak use.
- Space and plumbing
- Room near the pressure tank, the condition of existing pipe, and a reachable drain and outlet all affect labor.
Well water treatment questions
Something not covered here? (262) 999-6575
Can my old iron filter be fixed instead of replaced?
Often, yes. Worn seals, a tired control valve or spent media can all be swapped out on many systems. If the tank is sound and the unit was sized right, we will quote the fix. If it is not, we will show you why.
Do I need both an iron filter and a softener?
Many wells do. A softener can remove small amounts of iron, but higher levels foul the resin and shorten its life. Putting an iron filter first lets the softener do its own job.
What warranty comes with a new system?
Our filtration and softening equipment carries 5 years on the control valve, circuit board and filter media. If you add a reverse osmosis unit for drinking water, it has 1 year of coverage, with the filters excluded.
How long will my water be off on install day?
For part of the visit while we cut in and connect the equipment. Once the bypass is in place, water comes back on and we finish startup and programming.
Will treatment change my water pressure?
A properly sized system should not noticeably lower it. Pressure problems usually come from an undersized or clogged unit, which is one of the things we check on the first visit.
Find out what your well really needs
Tell us what is happening at your taps and we will talk plainly about whether to fix what you have or start fresh. Financing information is available on the same call.